Page 1 of 1
Info on ring gear and pinion.
Posted: October 10th, 2012, 6:43 pm
by PTModIT
Hi, I posted in the WTB section for these parts,But were these off the shelf parts that a company stocked. Or were they made special for the 1/4 scale application.Did Skellenger make them or did Raco.Thanks.
Re: Info on ring gear and pinion.
Posted: October 11th, 2012, 5:42 am
by Mike Casey
they were originally off the shelf parts. They came from the Green machine roto tiller. Skellenger used to machine them down for their own application. After a while, they had the mfg of the gears for green machine start making them to their specs.
Re: Info on ring gear and pinion.
Posted: October 11th, 2012, 8:15 am
by PTModIT
Thanks Mike.But are they still available? I sent a email to one place.My next step is a machine shop.
Re: Info on ring gear and pinion.
Posted: October 11th, 2012, 8:20 am
by Mike Casey
No they are not. That is why i had to have some made for the skellenger project i was working on. Minimum was 100 sets and it was BIG money. Tried to sell them at cost to the community but only sold 11 sets...